The choice of paint for tiles in the bathroom and application technology

The question of whether it is possible to paint the tiles is asked by many owners who decide to update the interior in the bathroom without major repairs. And for good reason, bathroom tile paint is an excellent solution to many problems that arise during operation. There are several reasons for using paintwork. Among the main ones is the renewal of an outdated interior. But we must not forget about the practical side of the issue. The fact is that due to high humidity and temperature changes, the old coating on the tile can become cracked. In this case, coloring can correct this situation.

When redecorating the bathroom begins, a natural question arises: how to paint the tiles? After all, there are many different compositions that differ in their characteristics. So, you should know the following:

In order to fix the result, you need a varnish. It fixes the surface and protects it from mechanical damage. Water-based compositions are most suitable for working in the bathroom; they do not change their color over time.

Advice! There are also special solutions for ceramics. They are used much less frequently. The reason is the high cost of such paints. Although they are recommended for creating drawings.

Cleaning and degreasing

All work begins with preliminary surface preparation. At the first stage, the work area should be thoroughly cleaned and degreased. For the process you will need:

• hard brush or sponge with a hard side;
• stain removal solution;
• water at room temperature;
• hand protection gloves.

If detergents are used on the basis of acids, then it is better to work in a respirator. After all, you will have to wash a large area, and the bathroom is very closed - it is easy to inhale harmful fumes.

The cleaning procedure is very important. If it is neglected or not fully implemented, then all the advice on how to paint the tile correctly will be meaningless. The technology for removing various contaminants may be different:

1. The composition for small dirt is prepared from a means for washing surfaces or dishes. To do this, dilute half a glass of such a substance in a bucket. The resulting liquid is thoroughly mixed to form a rich foam. The mixture is applied to the areas with a hard sponge and rubbed thoroughly. Particular attention is paid to the joints.
2. If the stains are very ingrained, then they are removed with a chlorine solution. This liquid is mixed with cold water and impregnated with the necessary areas. After ten minutes, you can wash the dirt with a brush.
3. Abrasives are also used. There is no need to be afraid that the tile will be damaged - this is a natural process that will be enhanced by subsequent grinding.
4. For complete cleaning, a rag is used to remove the remnants of soap solutions. Next is the treatment with alcohol (vinegar or kerosene).

Degreasing is carried out based on the following proportions:

• Alcohol is diluted in water in a ratio of 1:2.
• Vinegar is diluted in water in proportions of 1:1.
• Kerosene should be diluted 1:4.

Work is carried out by wetting rags (waffle towel, napkin) and carefully wringing it out. It turns out a damp cloth, which wipes the entire surface well. The process is constantly repeated.

Working with the base

Painting tiles begins with a complete sanding of the surface. This is done in order to ensure excellent adhesion of materials. This activity can be done in a variety of ways:

• Use sandpaper. To do this, it is fixed on a bar, which is easy to make from scraps of a wooden board. It is very convenient to handle hard-to-reach areas with such a device.
• Apply a sanding grid. She gets under the grinding grater. The work with this tool is very fast.
• Carry out the process with a grinder. Of course, this must be done very carefully so as not to get a lot of bumps. Be sure to use eye protection.

All grinding devices must have only a fine fraction. Otherwise, large scratches will remain on the surface that cannot be hidden.

On a note! If the coloring solution is based on epoxy resins, then special primers are selected for it.

Coloring technology

Tile painting is carried out according to the following instructions:

1. Remove all possible objects from the room. If it is impossible to disconnect the plumbing, then it is carefully packed in cellophane film. When finishing is carried out on the walls, the floor and baseboards are closed.
2. The paint is well mixed. Pay attention to the instructions, each manufacturer indicates additional preparation parameters. Next, pour the solution into a special tray.
3. Work is carried out using foam rollers. They allow you to capture large areas of the surface. Brushes apply the composition in hard-to-reach places.
4. Absolutely no tools are dispensed with when using car enamels. Although it is necessary to maintain the correct distance to the surface. When the solution is sprayed too close to the wall, sags and streaks form. If you make the distance very large, then poorly painted areas with matte shades appear.
5. After the entire surface is painted, it is left for twelve hours. The exact time for drying should be indicated in the instructions.
6. Now you need to re-stain. Only two layers of emulsion are able to completely paint over the old tile.
7. If required, the seams are isolated in separate shades. This must be done carefully so as not to spoil the surface of the ceramics.
8. When complete drying comes, the walls are covered with a layer of colorless varnish.

On a note! Do not force dry with a hair dryer. This process leads to the appearance of numerous bubbles and damage to the material.

The rooms where staining was made are not used until the final drying occurs.

How to decorate yourself

How to paint the tiles in the bathroom so as to completely update the design:

• Create an individual pattern on the painted surface. To do this, you need to have the ability to draw. But the effect will be amazing.
• Use a stencil. Now there is a large selection of such devices that allow you to choose your favorite theme.
• Play with contrasts. For this, several shades of emulsion are used.

From the foregoing, we can conclude that it is quite simple to paint a tile, but it is necessary to follow the technology of preparation and staining.