Waterproofing

Penetrating waterproofing has been known for a long time. Back in Soviet times, special compositions based on sodium methyl siliconate were used, which were used to impregnate the surfaces of concrete, stone and brickwork. As a result of a chemical reaction of a substance with carbon dioxide

Date: 05/05/2015 Views: 2055 Comments: Rating: 24 How to waterproof a foundation correctly? Waterproofing a monolithic slab foundation Strip foundation and its waterproofing Applying a plaster layer with your own hands Waterproofing fu

Renovating a bathroom is not an easy task. A mandatory stage of bathroom renovation is waterproofing work. This is necessary to reduce the risk of leaks, as well as to prevent the spread of fungus and bacteria. Selection of compositions for both

Unfortunately, there are cases when a house has already been built and occupied, and it turns out that the foundation waterproofing was either not carried out or was not done well. This is indicated by constantly wet walls in the basement, or even puddles that form near them.

Laying the coating in a bathroom or toilet must provide protection from moisture. At the same time, waterproofing the floor under the tiles is done in different ways, using both very inexpensive and effective rolled materials, and using

A bathroom is a room in which there is constantly high humidity and warm steam accumulates. Such conditions in the absence of high-quality ventilation lead to the appearance of condensation on the walls. Stagnating on the tiles, dampness can cause trouble.

The construction and arrangement of the foundation must be approached responsibly and very carefully, since the durability of the house will directly depend on these activities. The foundation is influenced by groundwater, capillary and surface water. In p

The bathroom in any home is the room with the highest level of humidity, where warm steam accumulates. Lack of quality will lead to the appearance of mold and an unpleasant odor. The most important action when performing veneers

Over time, residents of a private or apartment building may notice certain problems with the design of the building itself. The walls of basements or first floors begin to “tear” from the inside, sometimes small puddles of water appear under them. This is the one

Protection of basements from groundwater and sediment accumulation should be provided at the construction stage. But repeated waterproofing may also be required due to its destruction during the operation of the building. Reasons for the appearance of excessive dampness in

Waterproofing a house is a whole range of measures to protect it from the effects of moisture and water. It allows you to maintain the waterproofness of the foundation, walls, and roof of the house, ensuring their normal operation, increasing the reliability of the house and its durability. Hydroiso

Residential waterproofing is not discussed. It should always be done, keeping in mind that leaks threaten trouble with neighbors in apartment buildings, or - if we are talking about a private house - damage to property on the lower floors. In a special regard

Waterproofing the strip foundation of a residential building is necessary to prevent moisture from sediment and groundwater in the concrete and reinforcing elements included in the foundation structure. Wetting of concrete provokes destruction of the foundation when the foundation expands

Dampness, moisture, flooding with water (melt, groundwater) and, as a result, mold, destruction of concrete and foundation - all this is a consequence of improper or poor-quality insulation of the building. Waterproofing the underground (basement) floor of a private house, i.e. basement

Both during the construction and renovation of a bathroom, preliminary waterproofing of the bathroom floor under the tiles is very important, especially if there are rooms below and you want to avoid their flooding in the event of a possible communications failure. Let's look at a number of materials,